FLDM=FLDM_0, RRAE=RRAE_0, GE=GE_0, KBCE=KBCE_0, FERR=FERR_0, KBPE=KBPE_0, IRQE=IRQE_0, KBSE=KBSE_0, FSVM=FSVM_0, SKBP=SKBP_0
Control Register
| IRQE | IRQE 0 (IRQE_0): SR[KBERR] = 1 does not generate an interrupt request. 1 (IRQE_1): SR[KBERR] = 1 generates an interrupt request. |
| FERR | Force Error 0 (FERR_0): No effect on the SR[KBERE] indicator. 1 (FERR_1): SR[KBERR] is immediately set after a write with this data bit set. |
| FSVM | Force Security Violation Mode 0 (FSVM_0): No effect on the operating mode. 1 (FSVM_1): Force entry into SVM after a write with this data bit set and the data bit associated with FLDM cleared. SR[MODE] signals the operating mode. |
| FLDM | Force Logically Disabled Mode 0 (FLDM_0): No effect on the operating mode. 1 (FLDM_1): Force entry into LDM after a write with this data bit set. SR[MODE] signals the operating mode. |
| KBSE | Key Blob Scramble Enable 0 (KBSE_0): Key blob KEK scrambling is disabled. 1 (KBSE_1): Key blob KEK scrambling is enabled. |
| KBPE | Key Blob Processing Enable 0 (KBPE_0): Key blob processing is disabled. 1 (KBPE_1): Key blob processing is enabled. |
| KBCE | Key Blob CRC Enable 0 (KBCE_0): CRC-32 during key blob processing is disabled. 1 (KBCE_1): CRC-32 during key blob processing is enabled. |
| RRAE | Restricted Register Access Enable 0 (RRAE_0): Register access is fully enabled. The OTFAD programming model registers can be accessed “normally”. 1 (RRAE_1): Register access is restricted and only the CR, SR and optional MDPC registers can be accessed; others are treated as RAZ/WI. |
| SKBP | Start key blob processing 0 (SKBP_0): Key blob processing is not initiated. 1 (SKBP_1): Properly-enabled key blob processing is initiated. |
| GE | Global OTFAD Enable 0 (GE_0): OTFAD has decryption disabled. All data fetched by the FlexSPI bypasses OTFAD processing. 1 (GE_1): OTFAD has decryption enabled, and processes data fetched by the FlexSPI as defined by the hardware configuration. |